| Lens | Vario-Eupronet 15-30mm f/1.3 |
|---|---|
| Running speed(s) | 18 – 24fps |
| Format(s) | Super 8 & Standard 8 |
| Reel Capacity | 400ft (120m) |
| Lamp | 12v 100w A1/215 (FCR) |
| Reverse Projection | Yes |
| Automatic Threading | Yes |
| Sound | Silent |
| Dimensions (W x H x D) | 150 x 230 x 270mm |
Like many of the dual gauge projectors made by Eumig, this projector has two sets of sprockets and gates. To change formats, all you need to do is swap the gates and sprockets over. If you buy one of these projectors you should always make sure that both sets of gates and sprockets are present. Getting replacements can be quite difficult.
IMPORTANT: Before changing the film gate on one of these projectors, turn the inching knob (small knob at the rear of the projector) until the red dot is at the 12 o’clock position. If you don’t you risk damaging the projector claw.
