Download

Eumig – Projector – P8 – User Manual

Attribute Value
Posted August 18th, 2010 by
Downloaded 507 times
Categories
Size 1.67 MB

Description

User manual for the Eumig P8 standard 8 projector.

Comments

Andrew Evans's Avatar

Andrew Evans

February 3, 2011 at 7:53 pm

Sir, I have inherited my fathers Eumig P8 projector. The rubber belt at the rear of the proj. in side has perrished.
Is this the drive belt ? Are they still available to buy, so I may replace it and view the few films that my father has left.
Do I need a code No. and where would be the best place to locate one ?
Many thanks.

admin's Avatar

admin

February 3, 2011 at 8:47 pm

I’m assuming your in the UK from your e-mail address if not let me know and I can give you some local sources.

For Eumig P8 belts in the UK the best place will probably be eBay. You could also try mikebelts@yahoo.co.uk who I believe will be able to help too.

When changing the belt be careful. The drive shaft on Eumig P8 projectors is live! Never replace the belt with a belt made from conductive material and never replace the belt while the projector plugged in.

Andrew Evans.'s Avatar

Andrew Evans.

February 6, 2011 at 3:07 pm

Thank you very much for your reply to my request for information on my Eumig P8 projector on the 3rd. I live in Warwickshire, I am assuming that the drive belt is the only belt on the projector. Thanks also for the safety warning re – drive shaft being live. I will try mikebelts@yahoo.co.uk before tackling ebay. Thanks again,
best wishes, A.E.

(Required)

(Requried but not published)

XHTML: You can use these tags: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>