Specifications
| Running speed |
Variable. 18-24 f.p.s. |
| Lamp |
12v 100w A1/231 (ANSI EFP) |
| Lens |
15-30mm f/1.3 (LUX models have “Suprogon” 12.5-25mm f/1.2) |
| Reel Capacity |
600ft |
| Format |
Dual gauge (Standard 8 & Super 8 ) |
| Sound |
Magnetic |
| Speaker |
4-8 Ohms, 10W |
| Weight |
Unkown |
| Size (W x D x H) |
Unkown |
| Year of production |
Unkown |
| Used Price (rough guide only) |
£20 – £80 |
There are four versions of the Eumig 810 projector. They are:
- S 810 – This version is Super 8 only.
- 810D – Dual Gauge (Super 8 & Standard 8).
- 810D H.Q.S. (High Quality Sound) – Same as 810D, but with higher quality sound.
- 810D LUX – Identical to the 810D H.Q.S. but with the “Suprogon” 12.5-25mm f/1.2 lens.
The dual gauge Eumig 810 projectors have two sets of sprockets and gates which enable you to change format. Quite often the sprocket and gate sets go missing, so if you are planning to buy one make sure it has both sets.
The user manual for the Eumig Mark S 810 – 810D – 810D LUX projectors is available from the downloads area.
Posted in Eumig | No Comments »
Specifications
| Lens |
8.5- 25.5mm f/1.0 3x zoom |
| Macro |
Yes, 21.5cm |
| Running speed |
Variable, approx. 3-24f.p.s. |
| Lamp |
12v 100w A1/186 (Available from Jessops for £10 at time of writing) |
| Lens |
25mm f/1.6 |
| Reel Capacity |
400ft (120m) |
| Format |
Standard 8 |
| Sound |
Silent. A sound attachment was available for syncing the projector to a 1/4 tape player. |
| Weight |
Under 10lb (9.5kg) |
| Size |
22×13x22cm |
| Year of production |
955-1960 (Replaced by a new version of the Eumig P8) |
| Used Price (rough guide only) |
£5 – £30 |
The Eumig P8 was probably one of the most popular Standard 8 projectors ever made and is very well built.
The manual for the Eumig P8 is available in the downloads area.
Warning: The drive shaft on Eumig P8 projectors is live! Never replace the belt when the projector is plugged in and never replace the belt with one made from a conductive material.
Posted in Eumig | No Comments »
Specifications
| Running speed |
18 – 24fps |
| Lamp |
12v 100w A1/215 (FCR) |
| Lens |
Euprozoom-M1 14-25mm f/1.4 or Euprovar 13-25mm f/1.3 |
| Reel Capacity |
400ft (120m) |
| Format |
Super 8 & Standard 8 |
| Sound |
Silent |
| Weight |
15lb (6.8kg) |
| Size |
11.2 x 6 x 9.6 inches (285 x 150 x 245 mm) |
| Year of production |
Marketed in 1965 |
| Additional Information |
Reverse projection & automatic threading |
Like many of the dual gauge projectors made by Eumig, this projector has two sets of sprockets and gates. To change formats you just swap the gates and sprockets over. If you buy one of these projectors you should always make sure that both sets of gates and sprockets are present. Getting replacements can be quite difficult.
IMPORTANT: Before changing the film gate on one of these projectors, turn the inching knob (small knob at the rear of the projector) until the red dot is at the 12 o’clock position. If you don’t do this you risk damaging the projectors claw.
There is an old test report on the Eumig Mark M available from the downloads page.
If you have the manual for this projector and would like to sell/donate it please get in touch.
Posted in Eumig | No Comments »
Specifications| Lens | Vario-Eupronet 17-30 mm f/1.6 |
|---|
| Running speed(s) | 3, 6, 9, 12 & 18fps + single frame |
|---|
| Format(s) | Super 8 & Standard 8 |
|---|
| Reel Capacity | 400ft (120m) |
|---|
| Lamp | 12v 100w A1/231 (EFP) some versions have 12v 75w A1/230 (EFN) |
|---|
| Reverse Projection | Yes |
|---|
| Automatic Threading | Yes |
|---|
| Sound | Silent |
|---|
| Made in | Austria |
|---|
This projector is quite popular, especially with people who want to make a D.I.Y. telecine machines.
Posted in Eumig | No Comments »
Specifications| Lens | Vario-Eupronet 15-27mm f/1.6 |
|---|
| Running speed(s) | 9 & 18fps |
|---|
| Format(s) | Standard 8 & Super 8 |
|---|
| Reel Capacity | 400ft (120m) |
|---|
| Lamp | 8v 50w A1/17 (CXR) |
|---|
| Reverse Projection | Yes |
|---|
| Automatic Threading | Yes |
|---|
| Sound | Silent |
|---|
| Power source | 110-250V AC, 50/60HZ |
|---|
Posted in Eumig | No Comments »